Hello all, it's been very quiet for a very long time among you O911 owners.
Hope this finds everyone well.
I have an early Ericson built boat--1988-which I've raced hard on SF Bay. The Ericsons, like the Pacific built boats, tie off the starboard shrouds to a steel plate affixed to the head side of the bulkhead separating the head from the salon. My bulkhead looks like it's starting to fail. First I had cracks develop in the Melamine finish on the head side of the bulkhead, but they were small and not worrisome. Now I am getting more movement in the bulkhead, as if it is torquing under the load of the rig. My rigger is looking for a solution short of replacing the bulkhead, possibly by fabricating a larger steel plate onto which to tie the chain plate to spread the load over a larger area with more fasteners. The difficulty with this possible solution is that the bulkhead has two separate planes, one of which is the wood trim adjacent to the sink, making fabrication and installation of a new fastening plate much more of a chore.
Has anyone experienced this problem, and if so, do you have a fix? Thanks.
Good sailing to all.
Bob
Jane Doe
28555
Robert E. Izmirian
rizmirian@comcast.net Received on Wed Sep 16 22:50:44 2009